Pre Moulded Elbow Connectors up to 24kV 250A (for Type-A Bushing)

Faster installation.
Non-corrosive and UV resistant.
Outstanding mechanical, chemical & electrical properties.
Provides a fully screened and fully-submersible separable connection when mated with the proper bushing or plug.
Built-in capacitive test point allows for an easy check of the circuit status or installation of a fault indicator.
Unlimited shelf-life.
In compliance with IEC-60502-4.
AYD’s compression or shear head mechanical Lugs are recommended.

Specifications

Pre Moulded Elbow Connectors 250A (Type-A) are Tested as per IEC-60502-4

Pre Moulded Elbow Connectors up to 24 kV 250A

Code	Technical Parameter for Elbow Connectors up to 24 kV 250A
AYDECA
	Rated Voltage	12kV	24kV
	Rated Current	250A	250A
	Frequency Withstand Voltage	29kV/5min	54kV/5min
	Partial Discharge	11kV ≤10pC	20kV ≤10pC
	Impulse Voltage (± 10 time)	75kV	125kV
	Overcurrent (max. = 8h)	300A	300A
	Screen Resistance	≤5000W	≤5000W
	Application Cable (x-section)	35-150mm²	35-150mm²

Send us a message

Have a question, idea, or requirement? Drop us a message and our team will get back to you with clear answers no fluff, no delay.