50 Years of Excellence
Contact
Language Arrow
    Menu Icon

    Terminations

    1. Home
    2. Cold Shrink / Cable Terminations
    3. Cold Shrink Indoor Terminations 12 kV (for XLPE Cable)

    Cold Shrink Indoor Terminations 12 kV (for XLPE Cable)

    "The term ’Cold Shrink’ is applied to materials, which are capable of shrinking without raising the material above the ambient temperature of its immediate surroundings. The Cold Shrink Accessories are supplied from the factory in a pre-expanded condition and placed on a removable core. Removing the core when properly positioned over the cables causes shrinking."

    Features

    • It does not require heating by flaming nor special tools. Pull out the plastic string from silicon rubber tube, the silicon rubber will tightly shrink on the need position.
    • Reliable, superior insulation & high-recovery elasticity; we have adopted special silicon rubber, which will keep its radial pressure permanently ensuring environmental & electrical protection.
    • Superior hermetic sealing; for cable splicing, we have adopted triple hermetic sealing technology & silicon rubber with hermetic & hydrophobic performance; there will be no serious fault due to environmental cause.
    • Easy/convenient installation : by enlarging the dimensions of stress-cone, large tolerance will be permitted & faults due to installation are reduced to a minimum.
    • Wide Usage : possessing a series of superior performance such as anti-pollution, long usage, hydrophobic, cold-withstanding etc. The Cold Shrink accessories can be widely used in various regions, especially suitable for high level region, cold weather region, high-humidity region, salt-fog region & high-polluted region etc.
    Cold Shrink Indoor Terminations 12 kV (for XLPE Cable)

    Specifications

    TEST ITEMS OF COLD SHRINK INDOOR TERMINATIONS

    TESTING ITEMS U °/U TYPE 8.7/ 15 (17.5) KV
    50 Hz Voltage test 39 kV, 5min, no flashover, no strite
    Partial discharge test 15 kV < 1pc
    Cyclic load test, 3 cycles 3 cycles under 90-95°C, 22kV
    Impulses voltage test 95kV no flashover, no strike
    15 min, 50 Hz voltage with standing test 22kV, 15 min, no flashover,no strike
    Humidity test No any flashover, tracking erosion or mechanical damage occur at 1000h, 11kV
    14.5/25 KV 20.2/35 KV
    65 kV, 5min, no flashover, no strite 91 kV, 5min, no flashover, no strite
    25 kV < 1pc 35 kV < 2pc
    3 cycles under 90-95°C, 36kV 3 cycles under 90-95°C, 51.5 kV
    125kV no flashover, no strike 194kV no flashover, no strike
    36kV, 15 min, no flashover,no strike 51kV, 15 min, no flashover,no strike
    No any flashover, tracking erosion or mechanical damage occur at 1000h, 16kV No any flashover, tracking erosion or mechanical damage occur at 1000h, 24kV

    Ordering Information

    15 kV INDOOR TERMINATIONS

    CABLE CROSS SECTION (Sq. mm) FOR 8.5 (15)kV 1 CORE INDOOR TERMINATION (Kit Code)  
    25 - 50 DCSI 15-1X1 Enquire Now
    70 - 120 DCSI 15-1X2 Enquire Now
    150 - 240 DCSI 15-1X3 Enquire Now
    300 - 400 DCSI 14-1X4  Enquire Now
    CABLE CROSS SECTION (Sq. mm) FOR 8.5 (15)kV 3 CORE INDOOR TERMINATION (Kit Code)  
    25 - 50 DCSI 15-3X1 Enquire Now
    70 - 120 DCSI 15-3X2 Enquire Now
    150 - 240 DCSI 15-3X3 Enquire Now
    300 - 400 DCSI 15-3X4 Enquire Now

    24 kV INDOOR TERMINATIONS

    CABLE CROSS SECTION (Sq. mm) FOR 14.5 (25) kV 1 CORE INDOOR TERMINATION (Kit Code)  
    50 - 95 DCSI 25-1X1 Enquire Now
    120 - 185 DCSI 25-1X2 Enquire Now
    240 - 400 DCSI 25-1X3 Enquire Now
    CABLE CROSS SECTION (Sq. mm) FOR 14.5 (25) kV 3 CORE INDOOR TERMINATION (Kit Code)  
    50 - 95 DCSI 25-3X1 Enquire Now
    120 - 185 DCSI 25-3X2 Enquire Now
    240 - 400 DCSI 25-3X3 Enquire Now

    35 KV INDOOR TERMINATIONS

    CABLE CROSS SECTION (Sq. mm) FOR 20.2 (35) kV 1 CORE INDOOR TERMINATION (Kit Code)  
    50 - 95 DCSI 35-1X1 Enquire Now
    120 - 185 DCSI 35-1X2 Enquire Now
    240 - 400 DCSI 35-1X3 Enquire Now
    CABLE CROSS SECTION (Sq. mm) FOR 20.2 (35) kV 3 CORE INDOOR TERMINATION (Kit Code)  
    25 - 70 DCSI 35-3X1 Enquire Now
    95 - 185 DCSI 35-3X2 Enquire Now
    240 - 400 DCSI 35-3X3 Enquire Now

    Cold Shrink / Cable Terminations

    need
    more
    information?

    Al Yamuna Densons Industries

    Address 1 - PL214H Al Hamra Industrial Zone-NFZ, RAK, United Arab Emirates

    Al Yamuna Densons FZE

    Address 2 - P.O. Box 14577 Warehouse #1, Shed #9
    Technology Park, Ras Al Khaimah, U.A.E.

    Email : grace@alyamunadensons.ae

    Phone : +971 7 2233013

    Mobile : +971 542479518

    Interested in our products?

    Kindly provide your information, and our expert team will get in touch with you shortly.

    May I help you