Cold applied boots are moulded insulation to cover live parts of the bushings, they are suitable for the connection of the cable lug and right angle of switchgear or cable sector which can improve phase - to - phase and phase - to - ground insulation. They are used to increase insufficient of the air clearances for normal operation, the clearances are adequate to keep the air entrapped well below corona extinction level or to prevent the ashover due to rodents or high humidity. They also can withstand normal and surge voltages.
The installation of cold-applied boots is quick and simple. The boot can be easily removed and reinstalled without requiring additional materials or tools during the operational life of the termination system for inspection and repair.
| Performance | AYDCSB (Straight Type Boot) |
|---|---|
| Max. System Voltage | 17.5kV |
| Continuos Current | 250A/630A |
| Impulse Withstand | 95kV |
| Adaptor | No/Yes |
| Bushing Diameter | 31-45mm & 41-58mm |
| Bushing Type | Type-A, Type-B & Type-C, |
| Cable Cross Section | 35-400mm |
Have a question, idea, or requirement? Drop us a message and our team will get back to you with clear answers no fluff, no delay.
